Visit My Website

 

We've found this great article pertaining to What Would Cause My Electric Water Heater to Stop Working? listed below on the internet and think it made good sense to share it with you on this page.

Lots of contemporary houses utilize an electric water heater for their heating system, as a result of its ease as well as simplicity of use. However, just like any other electric home appliances, problems may emerge with its usage, unexpectedly. It can be actually aggravating to wake up to a cool shower rather than a warm one or having your bath with water that isn't warm sufficient or even also warm. Whatever the case might be, hot water heater problems can be fairly aggravating. Luckily, we've made a checklist of possible solutions to your hot water heater issues. There are a variety of aspects that could create much of these issues, maybe a problem with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you switch off the main power supply for safety and security. Whatever the problem is, getting it taken care of need to not pose excessive of a concern if you follow these steps:

 

Call A Professional:

If after changing all defective components and resetting your temperature level, the water heater still isn't working, you might need to speak to an expert plumber for a specialist viewpoint. The trouble with your heating unit could be that the cold and hot taps have been switched over or it may be undersized for the amount of warm water needed in your house. Whatever the situation may be, a professional plumber would certainly aid resolve the trouble.

 

Check Your Power Supply:

As fundamental as this might appear, it is very needed. Without adequate power, your water heater will certainly not work. So the first thing to do when your water all of a sudden retires is to validate that it isn't a power problem. Check if the fuse is blown out or the breaker stumbled. If the breaker is the issue, just transform it off and on once again. Change any damaged or worn-out fuse. Evaluate the appliance with power after these adjustments to see if it's currently working.

 

Check Your Thermostat:

If your water heater still isn't functioning or the water coming out isn't hot sufficient, you might require to examine the temperature settings on your upper thermostat. Make sure the circuit breaker is turned off prior to doing anything. Open the access panel and press the red button for temperature level reset above the thermostat. This ought to aid heat the water. Turn the circuit breaker back on and check if the problem has been fixed.

 

Inspect the Burner in the Hot Water Heater:

If it's not a power trouble, after that attempt having a look at your heating element if it is still working. Evaluate each of your heating elements to be sure the problem isn't with any of them. If any of them is defective, replace that part and then check whether the hot water is back on.

 

Conclusion

Hot water heater troubles are not constantly significant. Most of them result from small concerns like a blown fuse or damaged heating element. Replacing the faulty components need to suffice. Nonetheless, if you are still incapable to address the trouble, give a call to your nearby plumber to find to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Hopefully you liked our topic about No Hot Water — Water Heater Repair. Thanks a ton for taking time to browse our article. If you liked our article please do not forget to share it. Thanks a lot for your time invested reading it.

High-quality repairs here.